Parameter For iStick Pico:
Thread type: 510 thread;
Cell type: High-rate 18650 battery (not included)
Cell type: (Continuous discharge current should be above 25A);
Output mode: VW / Bypass / TC (Ni, Ti, SS, TCR-M1, M2, M3) mode;
Output wattage: 1~75W;
Resistance range: 0.05~1.5 ohm (TC modes);
Resistance range: 0.1~3.5 ohm (VW / Bypass mode);
Temperature range: 100~315’C / 200~600’F (TC modes);
1. Tiny and Cute Appearance: With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.
2. Interchangeable 18650 Cell: Users can carry spare cells when on the go and change the cell easily by removing the battery cap only.
3. TC-SS and TCR Modes Available: Despite the compact size, the iStick Pico allows an intelligent but yet satisfying draw with 75W maximum output and switchable VW / Bypass / TC (Ni, Ti, SS, TCR) modes.
4. Unique Bottom Design: The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.
5. Micro USB Port
Charging: The 18650 cell can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge.
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
MELO III 3 Mini Clearomizer features:
510 threading connection with solid center pin;
Removable 510 drip tip;
Top filling system;
Glass tank size: 22mm x 25mm (D x H);
Juice capacity: 2mL;
Adjustable airflow control: 1 air holes on the top and 1 air holes on the bottom;
Comes with a coil head;
1. Top E-liquid Filling: The e-liquid can easily be refilled by removing the top cap of MELO III Mini only.
2. Detachable Structure: All the parts of MELO III Mini can be detached, bringing more convenience in maintenance.
3. Invisible Airflow Control: This new design of the invisible airflow control is also a plus to the fashionable appearance of MELO III Mini.
Full Kit Package Contents:
1 x iStick Pico Mod
1 x Melo III Atomizer (0.3Ω EC Head Pre-Installed)
1 x 0.5Ω EC Head
1 x Micro USB Cable
4 x Spare Silicone O-Rings
1 x iStick Pico User Manual
1 x Melo III Mini Atomizer User Manual